Premium-quality fully tempered and heat strengthened glass with CTFs/e full-convection furnaces

With CTFs/e-series tempering furnaces, top aesthetic quality and perfect isotropy for fully tempered glass and heat strengthened glass are more than just a promise. It is the result of many years of experience and a perfected process for the full tempering and toughening of all coated and uncoated glass, pane sizes, and pane thicknesses. Scanners provided by manufacturers such as Viprotron and Arcon classify the safety glass as visually free of anisotropy, thus objectively confirming premium quality that will leave a lasting impression on your customers.

CTFs/e - HEGLA TaiFin

Reliable tempering performance and perfect isotropy for coated and uncoated glass

The CTFs/e tempering process is controlled using a user-friendly, database-driven controller, and the results can be reliably reproduced at any time. The unique 3D high convection technology is a key factor in producing aesthetically perfect safety glass. It precisely coordinates the heat used based on the requirements of the flat glass before it is applied to the top and bottom surfaces. A tight network of sensors located close to the glass monitors the temperature in real time. Via high-performance convectors, these sensors regulate the thermal flow of the closed, energy-saving circuit. In line with the CHAMOS principle, the surface is protected against direct radiation from the radiators; this prevents uncontrolled transformations that could be caused by light reflection.

Contact Alois Kattner Austria
Alois Kattner


Please contact me

Do you have any questions or require further information on this subject?

+ 43 (0) 27 23 82 70 office@glasmak.at
Kontakt France
Daniel Kolopp


Please contact me

Do you have any questions or require further information on this subject?

+ 33 (0) 3 88 / 91 01 01 daniel.kolopp@heglafrance.com
Kontakt Donatas Jakutis Litauen
Donatas Jakutis


Please contact me

Do you have any questions or require further information on this subject?

+370 650 11376 donatas@glastech.lt
Contact Eero Jalkanen
Eero Jalkanen


Please contact me

Do you have any questions or require further information on this subject?

+03 58 44 21 00 76 7 eero.jalkanen@treglas.com
Contact Ghassan Nassar Egypt
Ghassan Nassar


Please contact me

Do you have any questions or require further information on this subject?

+20 10 66 85 29 62 +20 100 10 8 22 55 polychem.egypt@tedata.net.eg
Kontakt USA
HEGLA Corp.


Please contact me

Do you have any questions or require further information on this subject?

+1 404 763 9700 info@heglaus.com
Contact HEGLA-TAIFIN
Jukka Sääksi


Please contact me

Do you have any questions or require further information on this subject?

+358 50 570 6823 jukka.saaksi@taifin.com
Contact Naomichi Haizuka Japan
Kenji Usami


Please contact me

Do you have any questions or require further information on this subject?

+81 (0)3 5114 0852 kenji.usami@correns.co.jp
Kwan Hoong Mak


Please contact me

Do you have any questions or require further information on this subject?

+65 9627 4676 kh.mak@hegla.de
Contact Marat Z. Khoussainov Russia
Marat Z. Khoussainov


Please contact me

Do you have any questions or require further information on this subject?

+ 7 977 714 99 13 hegla.rus@gmail.com
Representative Marcel Dagher MENA
Marcel Dagher


Please contact me

Do you have any questions or require further information on this subject?

+971505200516 marcel.dagher@hegla.de
Hegla Partnet Indien Naresh Kumar
Naresh Kumar


Please contact me

Do you have any questions or require further information on this subject?

+91 (0) 80 56 13 31 13 naresh.kumar@hegla.in
Pier Paolo Cavasin


Please contact me

Do you have any questions or require further information on this subject?

+39 338 79 49 924 pierpaolo.cavasin@taifin.com
Reinhold Gelbenegger, HEGLA
Reinhold Gelbenegger


Please contact me

Do you have any questions or require further information on this subject?

+49 (0) 5273 / 905-232 reinhold.gelbenegger@hegla.de
Hegla Spanien Ansprechpartner Rolf Meyer
Rolf Meyer


Please contact me

Do you have any questions or require further information on this subject?

+34 93 30 10 52 5 rolf.meyer@rmeyersl.com
Selçuk Genc


Please contact me

Do you have any questions or require further information on this subject?

+90 541 346 46 71 sales1@kalitech.com.tr
Kontakt Steve Goble England
Steve Goble


Please contact me

Do you have any questions or require further information on this subject?

+ 44 330 124 5759 steven.goble@hegla.co.uk
Xu Lei


Please contact me

Do you have any questions or require further information on this subject?

+86 186 6021 2118 xulei@taifin.com

Top-quality consulting, planning, and implementation

Determination and resilience, which are characteristic of the Finnish personality, are the fundamental values we embrace in our everyday work. We view ourselves as a supplier that offers quality and ensures that everything is easily and effectively kept under control. Our professionals, who have extensive experience, and the production of our machines under German standards both guarantee for our high level of quality. With them, we are able to achieve anisotropy values of up to 95% – and more. We believe that promises must always be kept, which is why our processes are as transparent and clear as our glass. Together with you, we will develop and produce the perfect product specifically for you. Together with the HEGLA Group, we have decades of knowledge and expertise at our disposal, enabling us to more than satisfy your requirements when it comes to automation, software, cutting, sorting and of course, hardening furnaces.

  • We enter into partnerships with our customers
  • Development of demand-oriented, customer-specific solutions
  • With a focus on Industry 4.0, we deliver individual software solutions
  • We offer the top-quality glass machinery for automotive and architectural needs
Impressions